The Rockwell test determines the hardness by measuring the depth of penetration of an indenter under a large load (60Kgf - 200Kgf) compared to the penetration made by a preload (10Kgf). There are different scales, which are denoted by a single letter, that use different loads or indenters. The result, which is a dimensionless number, is noted by HRX where X is the scale letter.
The determination of the Rockwell hardness of a material involves the application of a minor load followed by a major load, and then noting the depth of penetration, vis a vis, hardness value directly from a dial, in which a harder material gives a higher number. The chief advantage of Rockwell hardness is its ability to display hardness values directly, thus obviating tedious calculations involved in other hardness measurement techniques.
This method is widely used in Industry as the reading is available easily & quickly.
This method is widely used in Industry as the reading is available easily & quickly.
The above info is taken from Wikipedia. Please do refer to them for more info.
With warm regards
AllMyPosts
